Best Faucet Adapters for Portable Dishwashers
The best faucet adapters for portable dishwashers include the Hibbent 2-Pack Swivel for a hose that needs to angle, the Danco 10507 for a single compact fitting, and the Hygie Rinse 2-Pack for two sinks.
On this page (15 sections)
- The 6 best portable dishwasher faucet adapters in detail
- Side by side: thread, material and fit
- How we picked these six adapters
- How to read a fit claim
- Thread sizes explained
- What the adapters are made of
- What to check on your faucet before you buy an adapter
- Matching the adapter to your dishwasher hose
- Tank or faucet: when an adapter is the wrong choice
- If no adapter here matches your faucet
- Water savings and the aerator function
- Leaks, washers and when to call for help
- Renters: what to know before you change a faucet adapter
- Five checks before you buy an adapter
- Which portable dishwasher faucet adapter fits your sink
A faucet adapter is the small fitting that joins a portable dishwasher's hose to your sink. Four of the six adapters here name the same two thread sizes, but the fit still depends on your faucet.
We compared six adapters on thread, material, what each one fits and what its maker says about it. Check your faucet first, because the aerator and the faucet style decide which adapter you can use.
Start with the faucet, then the dishwasher's hose, and only then pick the adapter. The will a portable dishwasher fit your faucet guide walks through those checks.
For the full hookup, read how to hook up a portable dishwasher to your faucet. The countertop and portable dishwashers guide covers the other parts of the setup.
Our picks at a glance
-
1
-
2
-
3
- 4
Best for a Danby or SPT modelCheck it - 5
Best for an older Frigidaire, Maytag or Kenmore hoseCheck it - 6
Check itShark Industrial GE and Whirlpool
Best for a GE or Whirlpool fill hose
The 6 best portable dishwasher faucet adapters in detail
The Hibbent scores highest because its swivel ball joint lets you angle the hose, and its brass body has both common threads. The Shark Industrial scores lowest because it names only GE and Whirlpool hose assemblies and no model numbers.
Hibbent 2-Pack Swivel
- 360-degree swivel ball joint
- Brass body
- Works as an aerator when unconnected
- Rubber washers included
A brass adapter with a 360-degree swivel, so you can angle the hose away from the sink. Hibbent says its aerator mode can save up to 30 percent of water.
Pros
- Swivel ball joint lets the hose angle
- Dual threads for standard faucets
- Two adapters in the pack
Cons
- Doesn't name a specific dishwasher brand
- The 30 percent water saving is Hibbent's own figure
The Hibbent is a two-pack of brass adapters with a 360-degree swivel ball joint. The swivel helps when the hose needs to angle away from the sink or a cabinet.
The bottom side is a snap-on quick connect for the dishwasher hose. The top side has a 15/16 inch male thread on the outside and a 55/64 inch female thread on the inside.
When the hose is off, the adapter works as a faucet aerator. Hibbent says that mode can save up to 30 percent of water without losing pressure.
Rubber washers come in the pack to help seal the connection. Check the washers each time you reconnect, and replace any that look flat or cracked.
Hibbent says the adapter meets WaterSense, the EPA's label for water-efficient products, which you can read about at epa.gov/watersense. A swivel doesn't fix a thread mismatch, so match your faucet's thread first.
Skip it if your faucet uses a different thread, since the thread decides the fit.
Danco 10507
- Chrome-plated brass
- Dual thread for most faucets
- Large snap coupling
- Under an inch long
One compact chrome-plated brass fitting with a large snap coupling for the dishwasher hose. Danco says it's low lead.
Pros
- Chrome-plated brass for durability
- Dual thread for most regular faucets
- Small enough to sit neatly at the faucet
Cons
- No swivel joint, so the hose won't angle
- Danco's low-lead statement is the brand's claim
The Danco 10507 is one compact chrome-plated brass fitting with a large snap coupling for the dishwasher hose. Danco gives its threads as 15/16-27 male and 55/64-27 female.
It measures about 0.92 inches across and about an inch long, so it's a small piece to fit at the faucet. Danco says the dual thread fits most regular size faucets.
That makes it a simple first choice for a single sink with a standard aerator. If you have one sink, one piece is often all you need.
Danco says the fitting is low lead and complies with the federal rule on lead in drinking water. That's the brand's own statement, so check it against your own standards if it matters to you.
It has no swivel, so the hose won't angle the way it does on the Hibbent. Plan the hose route before you tighten anything.
Skip it if you want a swivel or a two-pack. It's a single piece with one snap coupling.
Hygie Rinse 2-Pack
- Two snap-on metal adapters
- Male 15/16 in adapter included
- Works as an aerator
- Installs without tools
Two snap-on metal adapters in one pack, so you have a spare or a second set for another sink.
Pros
- Two adapters in one pack
- Works as a faucet aerator when unconnected
- Rubber washers included
Cons
- Doesn't name specific dishwasher models
- Hygie Rinse's 30 to 70 percent water figure is the brand's claim
The Hygie Rinse is a two-pack of snap-on metal adapters in a chrome finish. It suits a home with two sinks, or one that wants a spare on hand.
The dishwasher adapter is the bottom side and the faucet adapter is the top. The faucet side is a 55/64 inch female thread, and a 15/16 inch male adapter is included for other faucets.
With no dishwasher hose attached, the adapter works as a faucet aerator with a bubble stream. Hygie Rinse says that mode can save 30 to 70 percent of water, which is the brand's own figure.
Rubber washers come in the pack, and Hygie Rinse says it installs without tools. The material is stainless steel.
It has no swivel, so the hose won't angle. Plan the route before you tighten the adapter.
Hygie Rinse doesn't name specific dishwasher models, so match it to your hose end and your faucet. Skip it if you want a fit that names your dishwasher's brand.
Piumeif Brass Connector
- Dual-threaded design
- Chrome-plated solid brass
- Four shims included
- Named fits for Danby and SPT
Chrome-plated brass connectors with named Danby, SPT, LG, Panda and Rovsun fits. Piumeif calls it an aftermarket part.
Pros
- Named fits for several portable brands
- Chrome-plated solid brass
- Four shims in the pack
Cons
- Piumeif calls it an aftermarket replacement
- Piumeif asks you to check the hose's inner diameter first
The Piumeif is a set of two chrome-plated solid brass connectors, and the pack also has four shims. Piumeif says the dual-thread design fits faucets with inside or outside threads.
Piumeif names Danby models including DDW1805W, DDW621WDB and DDW1899WP, and SPT models such as SD-9241SS, SD-6513SSA and SPT-2022. It also names LG, Panda and Rovsun portable dishwashers.
Match your exact model number to those names, and read the number on the dishwasher's label, since a similar name can be a different model.
Piumeif calls it an aftermarket replacement part and says the brand names only show compatibility. That matters if you want a part from the dishwasher's own maker.
Piumeif also asks you to check the inner diameter of your hose end first. That check matters more than the brand name when a hose is an unusual size.
Skip it if your dishwasher isn't on the named list, since the fit is only named for those models.
Piumeif 2-Pack Brass Set
- Two chrome-plated solid brass adapters
- Dual-thread for inside or outside threads
- Named GE, Whirlpool, Frigidaire, Maytag and Kenmore fits
- Snap fitting
Two chrome-plated brass adapters with named fits for older GE, Whirlpool, Frigidaire, Maytag and Kenmore hose assemblies. Piumeif says brand names show compatibility only.
Pros
- Names five hose brands, plus two part numbers
- Chrome-plated solid brass
- Two adapters in the pack
Cons
- Piumeif calls it an aftermarket replacement part
- Piumeif asks you to check the hose and faucet inner diameter first
The Piumeif 2-pack is a set of two chrome-plated solid brass adapters. Piumeif says the dual-thread design fits regular faucets with inside or outside threads, and that it connects portable clothes washers as well as dishwashers.
The fit claim is the draw. Piumeif names GE WD24X10066, Whirlpool, Frigidaire 5304483509, Maytag and Kenmore older countertop or portable fill and drain hose assemblies, and its product name also lists LG.
Piumeif says the adapter has full flow water capacity and an easy snap connection. Those are the maker's words, not measured results.
Piumeif calls it an aftermarket replacement part and says brand names show compatibility only. It also asks you to check the hose's water inlet and the faucet's inner diameter first.
Compare it with the other Piumeif set above, which names Danby and SPT models. This one names older hose assemblies from five brands instead.
Skip it if your hose isn't one of the named brands, or if you want an adapter from the dishwasher's own maker.
Shark Industrial GE and Whirlpool
- Made for GE and Whirlpool hoses
- Stainless steel
- Snap-on nipple
- Rubber washers included
A snap-on adapter for GE and Whirlpool fill and drain hose assemblies, made of stainless steel.
Pros
- Made for GE and Whirlpool hose assemblies
- Stainless steel construction
- Rubber washers included
Cons
- Names only GE and Whirlpool hose assemblies
- No model numbers are named, so match the hose end first
The Shark Industrial adapter is made for GE and Whirlpool portable dishwasher fill and drain hose assemblies. One end threads onto the faucet and the other snaps onto the hose assembly coupler.
The inside thread is 55/64 by 27, and the outside thread is 15/16 by 27, with a large snap-on nipple. It's stainless steel, and rubber washers come in the pack.
The thread match is the decision that matters most. Check the thread on your faucet's aerator first, because a GE or Whirlpool hose won't help if the aerator doesn't match.
Shark Industrial doesn't name model numbers, so match the hose end on your dishwasher to the snap coupler. Our best portable dishwasher hoses roundup covers the GE and Whirlpool hose assemblies.
Skip it if your dishwasher isn't GE or Whirlpool. The adapter is built for those hose assemblies only.
Side by side: thread, material and fit
Four of the six name the 15/16 inch male and 55/64 inch female threads, so the fit column is the first thing to check. The first Piumeif set is the only one that names dishwasher models, the second Piumeif set names hose assemblies from five brands, and the Shark is limited to GE and Whirlpool.
The table shows threads, material and fit, and each card explains what the numbers mean for your sink.
| Product | Best for | Thread | Material | Fits | Our score |
|---|---|---|---|---|---|
| Hibbent 2-Pack Swivel | a hose that needs to angle | 15/16 in male, 55/64 in female | Brass | Snap-on portable dishwasher hoses | 8.8 |
| Danco 10507 | a single compact fitting | 15/16-27 male, 55/64-27 female | Chrome-plated brass | Most regular size faucets | 8.5 |
| Hygie Rinse 2-Pack | two sinks | 55/64-27 female, 15/16-27 male | Stainless steel, chrome finish | Faucets and portable dishwasher hoses | 8.4 |
| Piumeif Brass Connector | a Danby or SPT model | Dual-threaded, inside and outside | Chrome-plated brass | Danby, SPT, LG, Panda and Rovsun portables | 8.2 |
| Piumeif 2-Pack Brass Set | an older Frigidaire, Maytag or Kenmore hose | Dual-thread, inside and outside (NPT) | Chrome-plated brass | Named GE, Whirlpool, Frigidaire, Maytag and Kenmore hoses | 8.0 |
| Shark Industrial GE and Whirlpool | a GE or Whirlpool fill hose | 55/64-27 inside, 15/16-27 outside | Stainless steel | GE and Whirlpool fill and drain hose assemblies | 7.9 |
The Hibbent, Danco and both Piumeif sets are brass, while the Hygie Rinse and Shark are stainless steel.
How we picked these six adapters
We compared thread sizes first, since the wrong thread means the adapter won't connect at all. Then we looked at what each adapter fits and what its maker says about it.
Our score weighs specs, features and buyer feedback against what you're shopping for.
An adapter that names a dishwasher brand or hose scored higher than a general kit, since a named fit leaves less guessing. Water-saving claims earned no extra points, since they come from the makers.
How to read a fit claim
Read three things before you buy: the thread sizes, the dishwashers the adapter is made for, and what's in the pack. The fit claim does the most work, so compare it with your dishwasher's manual.
A fit claim that says only dishwasher is less specific than a list of brands and models. Treat it as a starting point, and match the hose end to it.
The pack contents tell you whether a rubber washer, a snap fitting or a spare piece comes in the box. A missing part means an extra trip to the store and a delay in setup.
Thread sizes are the strictest part of the fit. A close size is still the wrong size, so use the exact number from your aerator.
Aftermarket parts and named brands
Both Piumeif sets are aftermarket replacement parts, and Piumeif says any brand name is used only to show compatibility. A named brand is a guide, and your own hose end is the proof.
The 2-pack brass set also names GE WD24X10066 and Frigidaire 5304483509. Look for a number like those on your hose assembly or in its manual before you count on a match.
If the numbers or the hose end don't line up, ask the dishwasher's maker which adapter it supplies.
Thread sizes explained
The two common thread sizes here are 15/16 inch and 55/64 inch, each with 27 threads per inch. The number after the dash, such as the 27 in 15/16-27, is that threads-per-inch count.
Male means the thread sits on the outside of a piece, and female means it sits on the inside. Compare which side each adapter offers with what your aerator has.
A common mistake is to buy by how an adapter looks. Two parts can look alike and still not fit, so check the thread size on the aerator itself.
SPT names the same pair for its own adapter, a 15/16 inch male and a 55/64 inch female thread. It also says a faucet with an unusual aerator size may need a third-party adapter kit.
What the adapters are made of
Four of the six are brass and two are stainless steel. Brass is a common material for faucet parts, and a chrome finish is a surface layer on top.
Chrome-plated brass has a brass body with a chrome finish on the outside. The threads do the real work of the fit, so the thread size matters more than the finish.
Stainless steel resists rust, which suits a part that stays wet. Rubber washers wear out faster than the metal, so check their condition as well.
What to check on your faucet before you buy an adapter
Check your aerator, thread and faucet style before you buy. Those three things decide which adapter fits.
Check the aerator for your portable dishwasher faucet adapter
A removable aerator is the easiest case, and most adapters here are made for that setup. If the aerator comes off by hand or with a tool, it's removable.
Note the thread size on the aerator's base. That's the number to match against the adapter.
Inside or outside threads on the spout
Look at the tip of the spout. As a rule, a spout with threads on the outside takes the female 55/64 inch side of a dual-thread adapter, and a spout with threads inside takes the male 15/16 inch side.
Not every faucet follows the rule, so compare the numbers on your aerator with the adapter before you rely on it. The dishwasher's manual has the final word on the connection.
Pull-down and spray faucets
A pull-down or spray faucet can need a different adapter, and some won't take one at all. None of the makers here says its adapter is made for a pull-down head, which is a good reason to check your faucet type first.
Follow the manual for the hookup, and contact the maker if your faucet doesn't match any adapter here.
Side sprayers and leaks
SPT says some detached side sprayers can leak under line pressure. If your faucet has a side sprayer, follow the manual and ask a licensed plumber what your setup needs.
Matching the adapter to your dishwasher hose
Match the hose end first, because the adapter is only half of the connection. The Hibbent, Danco, Hygie Rinse, Shark and Piumeif all use a snap-on coupling on the dishwasher side, so your hose end has to suit that style.
Check your dishwasher's manual for the hose end it uses. If the hose end is a different size from the adapter, don't force it.
Piumeif says its 2-pack brass set suits older fill and drain hose assemblies, so find out which hose your unit came with. The Shark is aimed at GE and Whirlpool assemblies, so match the hose brand before you match the thread.
For the hoses that go with these adapters, see best portable dishwasher hoses and extension kits.
Tank or faucet: when an adapter is the wrong choice
An adapter is the right choice when your faucet fits and you want the dishwasher to run from the sink. If your faucet is a pull-down or spray style that won't take an adapter, a tank model may suit you better.
A tank model needs refilling by hand, but it skips the faucet thread check altogether. It's also a practical pick for a sink you can't change.
The water tank vs faucet hookup dishwashers comparison covers the trade-offs in more depth.
If no adapter here matches your faucet
Start with the adapter in the dishwasher's box, since the maker sized it for that unit. SPT says its own adapter fits a standard removable aerator, and that an unusual aerator size may call for a third-party adapter kit.
If your faucet has no removable aerator, a pull-down head or a built-in sprayer, contact the dishwasher's maker before you buy anything. A licensed plumber can tell you what your sink can safely support.
A tank model is the other way out, and our best countertop dishwashers with a water tank roundup covers those.
Water savings and the aerator function
Several adapters act as a faucet aerator when the dishwasher hose is off. Hibbent says its mode saves up to 30 percent, and Hygie Rinse says 30 to 70 percent.
Those are the makers' own figures, so treat them as claims and not as measured savings. Water use depends on your faucet and how you run the dishwasher.
If you leave an adapter on as an aerator, check the washers now and then. Keep your original aerator somewhere dry so you can put it back later.
Leaks, washers and when to call for help
A drip at the adapter can come from a washer that isn't seated or a thread that doesn't match. Unplug the dishwasher and turn off the faucet before you look.
Never force an adapter that doesn't fit the thread. Follow the manual, and skip tape or extra parts unless it says to use them.
Look for drips after the first few runs and again after you move the unit. Dry the connection with a towel first, so any new drip shows clearly.
If the adapter isn't the problem and water drains slowly, read portable dishwasher not draining? easy fixes to try. If a leak keeps coming back, contact the maker or a repair pro.
Renters: what to know before you change a faucet adapter
Check your lease before you change anything at the faucet. Some landlords want to know about a hookup, even one that comes off easily.
Keep the original aerator. If you remove it for an adapter, store it with the adapter so you can put it back when you move out.
Take a photo of the faucet before you change anything. A photo helps if a landlord asks what you connected.
Five checks before you buy an adapter
Work through these checks first, since a wrong part is the simplest thing to avoid. Each one takes a minute.
Confirm your aerator type and its thread size. Then check whether the dishwasher hose end snaps on or screws on.
If the adapter names a brand, confirm your dishwasher model against that list, using the model number on the dishwasher's label.
If the adapter names a hose part number, such as the two the Piumeif 2-pack names, compare it with the number on your hose or in its manual.
Decide whether you want a swivel, a spare or a single fitting. The right answer depends on your sink and cabinet space.
Keep the receipt and the box until the connection works without leaks.
Which portable dishwasher faucet adapter fits your sink
Pick the Hibbent if your faucet needs an angled hose and you want an aerator mode. Pick the Danco if you want one compact brass fitting and don't need a swivel.
Pick the Hygie Rinse if you want two adapters for two sinks or a spare. Pick the Piumeif Brass Connector if your dishwasher is a named Danby, SPT, LG, Panda or Rovsun model and you've checked the inner diameter.
Pick the Piumeif 2-Pack Brass Set if you have an older Frigidaire, Maytag or Kenmore hose. Pick the Shark if you have a GE or Whirlpool fill hose.
Check your faucet first, then match the adapter to the hose, and follow the manual for each step.
Our top 3 picks at a glance
-
1
-
2
-
3
Frequently asked questions
What thread size does a portable dishwasher faucet adapter need?
Four of the six adapters here name a 15/16 inch male and 55/64 inch female thread, the same pair SPT names for its own adapter. Check the thread on your faucet's aerator first, since the aerator decides which adapter fits.
Will a faucet adapter fit a pull-down faucet?
Not always, and none of the makers here says its adapter is made for a pull-down or spray faucet, so check your faucet type first. If the spout has no matching threaded aerator, follow the dishwasher's manual and ask its maker what to use.
Do I need an adapter for a portable dishwasher?
Most faucet-fed portable models need one to join the hose to the sink, and many ship with one in the box. Check what comes with your model, then follow the manual for the connection and keep the packaging until it works without leaks.
Can a faucet adapter leak?
A drip at the adapter can come from a washer that isn't seated or a thread that doesn't match. Unplug the dishwasher and turn off the faucet before you look, and contact the maker or a repair pro if the leak keeps coming back.
